本公司所售产品为出国外定制产品，国内使用者如是在国内使用请勿下单.
本公司所标价产品都是不包括税点，开票另加税点
跨境包裹密封袋装：15g.中英文说明书.无电池无磁
迷你太阳能灯电路控制板.不带过充过放保护.需要电池上自带保护板.适合太阳能草坪灯.太阳能壁灯.太阳能陶瓷灯.太阳能景观灯.太阳能柱头灯.太阳能庭院灯等太阳能灯产品上电路控制用.
本电路板没有过充过放保护.
电池必须要自带保护板，否则会过充或过放而损坏电池
参数：
兼容电池电压：3.7V-24V之间的电池
输入太阳板要求电压：电池电压X1.5倍是要配的太阳板电压
输出电压：接多少V电池输出就是多少V.
输入电流：<3A
放电电流：<1.5A
控制方式：光控控制（接上太阳板后白天灯不亮.天黑自动亮）
尺寸：25*15mm
透用于太阳能草坪灯.太阳能柱头灯.太阳能景观装饰灯.太阳能小壁灯等小功率太阳能产品控制
注：1.此线路板的输出端不能接各类型升压电路；
2.LED 灯珠请勿直接使用，需接降压驱动（或串联合适的电阻限流）；
3.电池必须要加保护板，否则会过充或过放而损坏电池
请先连接电池.再接LED灯.最后接太阳能板
The circuit board has no over charge and over discharge protection
The battery must be equipped with a protection board, otherwise it will be overcharged or discharged and damage the battery
Parameters:
Compatible battery voltage: 3.7v-24v
Solar panel input voltage: battery voltage X1.5 = solar panel voltage
Output voltage: battery voltage = output voltage
Maximum input current: < 3A
Maximum output current: < 1.5A
Control mode: light control (after connecting the solar panel, the light is not on during the day. It will be on automatically in the dark)
Size: 25 * 15mm
It is widely used in solar lawn lamp, solar column lamp, solar landscape decorative lamp, solar wall lamp and other low-power solar products control
Note:
1. The output terminal of this circuit board cannot be connected with various types of boost circuits;
2. Do not use LED lamp beads directly, but need to be connected with step-down drive (or series suitable resistance current limiting);
- 3. The battery must be equipped with a protective board, otherwise it will be damaged due to overcharge or over discharge
- 4. Please connect the battery first, then the LED lamp, and finally the solar panel
贝尔五金
联系店铺客服 
联系店铺客服 
